机械式摆锤冲击试验机

摆锤式冲击试验机（机械式）
满足标准：
摆锤式冲击试验机（机械式）
摆锤式冲击试验机满足标准:
GB1043 抗冲强度 （塑料计量单位）
GB/T 1843 塑料悬臂梁冲击强度的测定（摆锤）
GB/T 18743-2002 流体输送用热塑性塑料管材 简支梁冲击试验方法
ASTM D256-2006 塑料及电绝缘材料抗冲击性试验方法（美）
JB/T 8762-1998塑料筒支梁冲击试验机
JB/T 8761-1998 塑料悬臂梁冲击试验机
ISO 9854-1-1994 流体输送用热塑性塑料管材 简支梁摆锤冲击强度试验
ISO179 & ISO180 塑料摆锤冲击试验方法（摆锤）
 
一、摆锤式冲击试验机主要适用范围及功能
适用于机械，冶金，大专院校，科研院所等各领域用来测定金属及非金属材料的冲击韧性值和检验材料的抗冲击能力。如测定工程塑料，玻璃钢，陶瓷，铸石，塑料电器，塑料管材等各种非金属材料的冲击韧性。
本机为摆锤式悬臂梁与简支梁组合式冲击试验机。可以通过更换锤头和支座来选择简支梁和悬臂梁两种不同的冲击方式。
 
二、摆锤式冲击试验机主要技术要求：
简支梁：
1、冲 击  能 量：（0.5J/ 1J/ 2J/ 4J 7.5J/15J/25J/ 50J可选配）
2、摆锤冲击速度： V=2.9m/s（≤4J：2.9m/s 　≥7.5J：3.8m/s）
3、试样中心到摆轴轴线的距离：230mm
4、摆 锤 预扬角：150°
5、允许试样长度：40mm、60mm、62mm、70mm、95mm
6、允许试样宽度：4mm-15mm
7、允许试样厚度：3mm-10mm
8、电       压:220V
9、锤头释放方式：电动释放
 
三、摆锤式冲击试验机设备主要配置：
1、机械主机一台
2、冲击锤一把
3、试验对中器一件

Pendulum impact testing machine to meet the standard:

GB1043 impact strength (plastics unit of measurement)

Determination of GB/T 1843 plastic Izod impact strength (pendulum)

GB/T 18743-2002 fluid transfer test methods for thermoplastic pipes Charpy impact

ASTM D256-2006 plastics and electrical insulating materials Standard Test Method for resistance to impact (beauty)

JB/T 8762-1998 plastic tube supporting beam impact testing machine

JB/T 8761-1998 plastic cantilever beam impact testing machine

Thermoplastics pipes for the simply supported beam Baichui impact strength test delivery of ISO 9854-1-1994 fluid

Test method for impact pendulum ISO179 & ISO180 plastic (pendulum)

A, pendulum impact testing machine is mainly applicable scope and function

Suitable for use in machinery, metallurgy, universities, research institutes and other fields are used for the determination ofimpact toughness of metal and nonmetal materialvalue and impact resistance test of material.Such as the determination ofengineering plastics, glass steel, ceramics, cast stone,plastic electric appliance, the impact toughnessof non-metallic materialssuch asvariousplastic pipe.

This machine is a pendulum type cantilever beam and simply supported composite impact testing machine. By replacing the hammerhead and support to select two different impact modes for simply supported and cantilever.

Two, pendulum impact testing machine main technical:

A simply supported beam:

1, the impact energy: (0.5J/ 1J/ 2J/ 4J 7.5J/15J/25J/ 50J optional)

2, pendulum impact speed: V=2.9m/s (≤ 4J:2.9m/s ≥ 7.5J:3.8m/s)

3, the sample center to the shaft axis distance: 230mm

4, the pendulum pre tilt angle: 150 °

5, allow the specimen length: 40mm, 60mm, 62mm, 70mm, 95mm

6, allow the specimen width: 4mm-15mm

7, allow the sample thickness: 3mm-10mm

8, voltage: 220V

Release 9, hammer: electric release

Three, a pendulum impact testing machine equipment configuration:

1, a host machine

2, the impact hammer

3, in a test on the device